Answer (1 of 7): At the fire station where I work, we have an overhead pipe with a short section of hose on it. It hangs right over the cover to the truck’s water tank. We put the end of the hose in the tank and open the valve. Many stations either …
First, the driver must engage the pump. To do this, the driver must use a button as seen in the picture. The driver must first place the button to neutral. Then the …
Tanker 14 – One-Person Fill Operation at a Fire Hydrant
In this video clip we examine the use of Tanker 14’s new Fireman’s Friend direct fill valve. The clip shows the tanker arriving at a fire hydrant with no ot…
As the truck pulls up to the hydrant, one firefighter needs to get off, grab the needed equipment, pull off a section of large diameter hose (LDH), walk to the hydrant, wrap the hose around the …
People Also Ask how to fill a water truck with fire hydrant
How do fire hydrants work?
Once the hydrant has been secured, the firefighter must communicate with the pump operator as to when water can be sent from the hydrant to the truck. After this has been done, that firefighter can then make their way to the structure to be reassigned or to help with the initial attack.
How do I pump the water in my truck?
The driver must first place the button to neutral. Then the driver must place the button into pump then press the DRIVE button as if he were putting the truck into motion. Note: by doing this the truck will not move due to the airbrake being in use. Prior to pumping, the driver must make sure the hose is fully out of the rack and ready for water.
How does a fire truck water pump work?
By setting the preset, the driver can adjust the levers to the appropriate psi making sure that the appropriate pressure is flowing through the hose. Next, if the driver chooses, they can pull the "Tank Fill" lever. This will enable the truck to refill its tank while still pumping water to the firefighters.
What should be in a fire hydrant kit?
This may include a hydrant kit containing items such as: The hydrant kit should not be too heavy or packed with too many items, keeping things lighter for a firefighter who must grab not only the kit and LDH while with a self-contained breathing apparatus (SCBA) on his or her back and trying to work.
People Also Searches how to fill a water truck with fire hydrant
Tanker 14 – One-Person Fill Operation at a Fire Hydrant Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher