Knowing how to use a fire extinguisher could save your life in an emergency. The key to putting out a fire with an extinguisher is to use the PASS strategy: Pull the pin, Aim the hose, Squeeze the lever, and Sweep the hose.
It is not recommended that children use fire extinguishers. Teach people how to use a fire extinguisher. When operating a fire extinguisher, tell residents to remember the word PASS: Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism. Aim low. Point the extinguisher at the base of the fire. Squeeze the lever slowly …
How to Use a Fire Extinguisher – Step by Step Guide
How to use a fire extinguisher. 1. Identify a clear exit/escape route. Before operating the fire extinguisher, make sure you have a clear evacuation path. If you cannot put out the … 2. Stand back. Face the fire and keep your back to the clear exit you earlier identified. You should stay between …
People Also Ask how to use a fire extinguisher
What are the four steps for using a fire extinguisher?
What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.
Do you know how to properly use a fire extinguisher?
To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.
How to use a fire extinguisher safely and effectively?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
What is the proper way to use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
People Also Searches how to use a fire extinguisher
| osha fire extinguisher training pdf |
| fire extinguisher use and safety |
| how to use a fire extinguisher handout |
| free printable fire extinguisher training |
| fire extinguisher procedure |
| fire extinguisher training |
| free fire extinguisher training |
| pass instructions for fire extinguisher |