Heavy duty motor equipment used in combustible environments or where heat or sparks are generated must have a fire extinguisher that is a minimum of 10 lb., ABC type, rated at 4:A:60BC. On a job site, a fire extinguisher rated a minimum of 10B has to be placed on a motor vehicle within 50 feet of any location where more than 5 gallons of flammable or combustible liquids …
1926.150 (c) (1) Fire extinguishers and small hose lines. 1926.150 (c) (1) (i) A fire extinguisher, rated not less than 2A, shall be provided for square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed 100 feet.
The size of fire extinguisher for construction equipment …
Per our conversation of May 23, the Occupational Safety and Health Administration‹s (OSHA) fire protection and prevention standard (29 CFR 1926.150 – Subpart F) does not state any specific weight or size requirements for fire extinguishers on construction equipment. As part of a fire prevention plan, a hazard assessment should be performed in …
People Also Ask are fire extinguishers required on heavy equipment
How many fire extinguishers do I need for my construction equipment?
There is no requirement listed for individual pieces of construction equipment, but section c-1-i indicates that a fire extinguisher rated not less than 2A must be provided for each 3,000 square feet of a protected area with a travel distance not exceeding 100 feet.
What type of fire extinguisher do I need for my vehicle?
Local managers can use their discretion with vehicles less than 10,000 pounds with regard to fire extinguisher type. Motor Vehicles weighting between 10,000 and 26,000 pounds must have a 2 1/2 lb., ABC type fire extinguisher rated at 1A:10BC. Heavier vehicles (as outlined by the Part 243 FW-1 statute) require a 5 lb., ABC type fire extinguisher.
Are portable fire extinguishers required to be inspected and maintained?
Portable fire extinguishers shall be inspected periodically and maintained in accordance with Maintenance and Use of Portable Fire Extinguishers, NFPA No. 10A-1970. Fire extinguishers which have been listed or approved by a nationally recognized testing laboratory, shall be used to meet the requirements of this subpart.
What size fire extinguisher can I use instead of a 2A?
One hundred feet, or less, of 1 1/2-inch hose, with a nozzle capable of discharging water at 25 gallons or more per minute, may be substituted for a fire extinguisher rated not more than 2A in the designated area provided that the hose line can reach all points in the area.
People Also Searches are fire extinguishers required on heavy equipment
| are fire extinguishers required forklifts |
| mobile equipment fire extinguisher requirements |
| safety equipment fire extinguishers |
| fire extinguishers on construction equipment |
| used fire extinguisher service equipment |
| fire extinguishers required by law |
| fire extinguisher servicing equipment |
| fire extinguisher equipment suppliers |
Free OSHA Training Tutorial – Portable Fire Extinguishers – Understanding Their Use and Limitations Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher