Using a fire extinguisher. Pull: Pull the pin, this will break the tamper seal. Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the … Squeeze: Squeeze the handle to release the extinguishing agent. …
A video showing how a fire extinguisher works and how to operate one by Fire and Safety Centre.https://www.fireandsafetycentre.co.uk/collections/fire-extingu…
How to Use a Fire Extinguisher: 14 Steps (with Pictures)
Step by step guide for how to use a DRY POWDER fire extinguisher. 1. Stand at least five to seven metres from the fire. 2. Break the tamperproof seal and pull the pin. 3. Hold the operating lever in one hand and with the other, remove the discharge hose nozzle from its storage point. Hold the …
People Also Ask how to operate a fire extinguisher uk
What are the steps of using a fire extinguisher?
There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.
How to use a fire extinguisher safely and effectively?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
Do you know how to properly use a fire extinguisher?
To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.
What is the proper way to use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
People Also Searches how to operate a fire extinguisher uk
| Choosing The Right Fire Extinguisher |
| Choosing The Right Fire Extinguisher |
| Fire Extinguiser Servicing |
| How Many Fire Extinguishers Do I Need |
| how to use a fire extinguisher handout |
| how to use a fire extinguisher pdf |
| types of fire extinguishers |
| kidde fire extinguisher |
| what fire extinguisher to use |
| fire extinguisher procedure |
| fire extinguisher safety |
| osha fire extinguisher training requirements |
Fire Extinguishers Training Video – UNITED KINGDOM Version Preview – Safetycare Workplace Safety Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher