A fire extinguisher is required for work zones

Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below). C As a C class extinguisher can only earn this rating if it has already gained an A, B, or AB rating and does not conduct electricity, the placement depends on the class A or B hazards in the workplace.

Here are the general requirements from OSHA 29 CFR 1910.157: Fire extinguishers need to be accessible to employees without subjecting them to possible injury. Extinguishers in the workplace must be OSHA-approved. Extinguishers must be fully operational and charged, and stored in a designated area when not in use.

1910.157 – Portable fire extinguishers. | Occupational …

The employer may use uniformly spaced standpipe systems or hose stations connected to a sprinkler system installed for emergency use by employees instead of Class A portable fire extinguishers, provided that such systems meet the respective requirements of 1910.158 or 1910.159, that they provide total coverage of the area to be protected, and that employees are …

Also Check: What class fire extinguishers are used for electrical fires

“One 55-gallon open drum of water with two fire pails may be substituted for a fire extinguisher having a 2A rating.” “A 1/2-inch diameter garden-type hose line, not to exceed 100 feet in length and equipped with a nozzle, may be substituted for a 2A-rated fire extinguisher, providing it is capable of discharging a minimum of 5 gallons per minute with a minimum hose …

How close to a fire extinguisher can an employee have access?

Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).

Also Check: Why can co2 be used in fire extinguishers

Does a fire extinguisher have to be above the ground?

OSHA requires fire extinguishers to be at least four inches above the ground, meaning you cannot store them on the floor. Does a fire extinguisher have to be mounted upright? The pressure within the extinguisher holds its contents and thus allows you to store it horizontally if you wish.

What are OSHA’s requirements for fire extinguishers?

“provide portable fire extinguishers and mount, locate, and identify them so that they are readily accessible to employees without subjecting the employees to possible injury.” OSHA also states that only approved fire extinguishers can be used. They must remain in their designated place unless being used.

When are portable fire extinguishers required for Class D hazards?

Portable fire extinguishers for Class D hazards are required in those combustible metal working areas where combustible metal powders, flakes, shavings, or similarly sized products are generated at least once every two weeks. Inspection, maintenance and testing.

Also Check: Can fumes from a fire extinguisher be toxic

People Also Searches a fire extinguisher is required for work zones

fire extinguishers required by law

code requirements for fire extinguishers

fire extinguisher requirements for offices

fire extinguisher requirements for business

fire extinguisher requirements for buildings

fire extinguisher location requirements

fire extinguisher requirements for apartments

fire extinguisher label requirements

1910.157(E)