Does a portable fire extinguisher need a hose

The employer may use uniformly spaced standpipe systems or hose stations connected to a sprinkler system installed for emergency use by employees instead of Class A portable fire extinguishers, provided that such systems meet the respective requirements of 1910.158 or 1910.159, that they provide total coverage of the area to be protected, and that employees are …

(a) Fire Extinguishers and Small Hose Lines. (1) A fire extinguisher, rated not less than 2A, shall be provided for square feet of the floor area, or fraction thereof. Where the floor area is less square feet at least one extinguisher shall be provided.

Do Fire Extinguishers Require a Sign? – SelectSafety.net

In their guidelines for fire extinguisher signs, the Federal OSHA regulation 1910.157 (c (1) does not specify a particular number as a height requirement for sign placement. Yet again, the only requirement OSHA states …

Also Check:  What is a 2a 10-b c fire extinguisher

Take time to read the operating instructions and warnings found on the fire extinguisher label. Not all fire extinguishers look alike. Practice releasing the discharge hose or horn and aiming it at the base of an imagined fire. Do not …

People Also Ask does a portable fire extinguisher need a hose

What do you need to know about portable fire extinguishers?

The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury. Only approved portable fire extinguishers shall be used to meet the requirements of this section.

Also Check:  What extinguisher used for electrical fire

How do I choose the right fire extinguisher?

Fire extinguishers can be heavy, so it’s a good idea to practice picking up and holding an extinguisher to get an idea of the weight and feel. Take time to read the operating instructions and warnings found on the fire extinguisher label.

When are portable fire extinguishers required for Class D hazards?

Portable fire extinguishers for Class D hazards are required in those combustible metal working areas where combustible metal powders, flakes, shavings, or similarly sized products are generated at least once every two weeks. Inspection, maintenance and testing.

When should a portable fire extinguisher be hydrostatically tested?

The employer shall assure that portable fire extinguishers are hydrostatically tested whenever they show new evidence of corrosion or mechanical injury, except under the conditions listed in paragraphs (f) (2) (i)- (v) of this section.

Also Check:  Do fire extinguishers have an expiration date

People Also Searches does a portable fire extinguisher need a hose

1910.157(E)
1910.157(E)
1910.157(A)
water fire extinguisher hose
fire extinguisher hose replacement
fire extinguisher hose and nozzle
fire extinguisher hose clip
vintage fire extinguisher hose
vintage fire extinguisher replacement hose
fire extinguisher hose strap

Everything You Ever Wanted to Know About Portable Fire Extinguishers Video Answer


Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher

Leave a Comment