Class 7 Radioactive material. Class 8 Corrosive substances. Class 9 Miscellaneous dangerous substances and articles. Each entry in the list has been assigned a specific UN number. Where vehicles are carrying, or are sometimes required to carry, any hazardous material, fire extinguishing equipment must be provided.
The Code requires portable fire extinguishers in buildings of every occupancy classification other than one- and two-family dwellings, whereas NFPA 101 requires portable fire extinguishers in far fewer occupancies. The different requirements of NFPA 1 and NFPA 101 are sometimes, incorrectly, perceived as a conflict, but they are not.
OSHA Fire Extinguisher Height, Placement, and …
A. NFPA recommends one 2-A fire extinguisher for square feet. OSHA requires employees to have access to an extinguisher within 75 feet. B. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below). C.
General requirements. 1910.157 (c) (1) The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury. 1910.157 (c) (2) Only approved portable fire extinguishers shall be used to meet the requirements of this …
People Also Ask does section 8 require a fire extinguisher
How many 2 a fire extinguishers are required in a building?
NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).
What are the OSHA fire extinguisher placement rules?
The OSHA fire extinguisher placement rules depend on the class of fire you expect to encounter. There are five classes of fire and this table shows the characteristics of the fire and the type of extinguisher needed to combat it. Carbon dioxide, dry chemical, clean agent. Not water under any circumstances.
When are portable fire extinguishers required for Class D hazards?
Portable fire extinguishers for Class D hazards are required in those combustible metal working areas where combustible metal powders, flakes, shavings, or similarly sized products are generated at least once every two weeks. Inspection, maintenance and testing.
How much clearance do you need for a portable fire extinguisher?
According to the Extinguisher Placement and Safety page of OSHA’s Evacuation Plans and Procedures eTool, there must be at least four inches clearance between the floor and the bottom of a portable extinguisher.
People Also Searches does section 8 require a fire extinguisher
Fire Extinguisher Locations 14-0 Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher