How do you apply extinguish fire and bait

PASS Step 2: AIM the nozzle, horse, or hose. Aim the nozzle, horn, or hose of the fire extinguisher at the base of the fire (this means the bottom, where the stuff that’s burning is located). A common mistake is to aim into the flames. This won’t put out the fire.

A broadcast treatment of Extinguish Ant Bait is 3 oz sq. ft. Step 2: Fill the spreader with the correct amount of Extinguish Fire Ant bait and adjust the spreader settings to ensure even distribution. Step 3: Walk around the perimeter of the lawn and work towards the middle, pushing the spreader at a steady pace.

How to Use a Fire Extinguisher: 14 Steps (with Pictures) – wikihow.life

1. Pull the pin. Every fire extinguisher has a pin inserted into the handle that prevents the fire extinguisher from being discharged by accident. Grab the ring and pull the pin out from the side of the handle. [2] Now that the extinguisher is ready to discharge, hold the device so the nozzle is pointed away from you.

Also Check: Where to buy extinguish fire ant bait

A. No, Extinguish Plus Fire Ant Bait Granules are a very safe solution to fire ants. When you apply this product, you normally would broadcast it over your lawn in such a small amount there would not be enough of it in one place for your pet to consume. This product is only strong enough to kill a very small ant.

How do you use extinguish plus fire ant bait?

Extinguish Plus Fire Ant Bait can be used as soon as fire ants or fire ant mounds are recognized. It can also be applied during early spring before fire ants begin building their colonies. Apply as needed, when ants are active and foraging (when soil temperature is above 60 degrees Fahrenheit).

Also Check: What is a p50 fire extinguisher

How do you put out a fire with an extinguisher?

The key to putting out a fire with an extinguisher is to use the PASS strategy: Pull the pin, Aim the hose, Squeeze the lever, and Sweep the hose.

How do I know what type of fire extinguisher I Need?

The easiest way is to look at the label on the fire extinguisher. It will tell you what type of fire (or fire class) the fire extinguisher can safely put out. Some extinguishers can only put out one type of fire. For example, you may see a fire extinguisher with an "A" rating.

What is the pass method for using a fire extinguisher?

The fire extinguisher steps method is known as PASS, and each letter in the word PASS (P, A, S, and S) stands for the first word of each step. The PASS method works for many common fire extinguishers. We’ve explained the four steps of the PASS method for using a fire extinguisher below.

Also Check: How far can you park by fire hydrant

People Also Searches how do you apply extinguish fire and bait

extinguish fire ant bait review

extinguish fire ant bait label

extinguish fire ant bait retailers

extinguish fire ant bait msds

extinguish plus fire ant bait

extinguish fire ant control

extinguish plus ant bait label