An extinguisher designed for use with a dry chemical only (ABC powder) like the one on the left in the figure is pressurized to 195 psi (1,344 kPa). Its gauge is in the green zone indicating that it is ready use. The clockwise red zone indicates an overcharged situation that could measure as much as 400 psi (2,758 kPa).
CO2 gas is held in the fire extinguisher under pressure, normally around 55 bars at room temperature. By comparison, pressure cookers operate at 1 bar of pressure, modern car tyres are usually inflated to a maximum of 2.5 bars, whilst airliner tyres are inflated at up to 14 bars. At a pressure of 55bars, around two-thirds of a carbon dioxide fire extinguisher’s …
Pressure of a Fire Extinguisher – The Physics Factbook
Since the gas disperses quickly, this type of fire extinguisher is only effective from 3 to 8 feet. There is not one set pressure for all fire extinguishers, they vary by class. The ones they use in firehouses are 690 kPa but the pressure in carbon dioxide extinguishers can go up to 5861 kPa. Victoria Poon — 2005
An extinguisher needs enough charge so that when it is discharged, there is an ample amount of dry chemical with a velocity sufficient enough to propel the chemical 10-20 feet. The range of a properly charged extinguisher is between 185-205 p.s.i. …
People Also Ask how much pressure can a fire extinguisher take
What is the pressure of a fire extinguisher?
There is not one set pressure for all fire extinguishers, they vary by class. The ones they use in firehouses are 690 kPa but the pressure in carbon dioxide extinguishers can go up to 5861 kPa.
How far does a gas fire extinguisher work?
Since the gas disperses quickly, this type of fire extinguisher is only effective from 3 to 8 feet. There is not one set pressure for all fire extinguishers, they vary by class.
How does a fire extinguisher compare to a pressure cooker?
By comparison, pressure cookers operate at 1 bar of pressure, modern car tyres are usually inflated to a maximum of 2.5 bars, whilst airliner tyres are inflated at up to 14 bars. At a pressure of 55bars, around two-thirds of a carbon dioxide fire extinguisher’s contents are in a liquid state, with a gaseous top layer.
What is the KPA of a fire extinguisher?
The ones they use in firehouses are 690 kPa but the pressure in carbon dioxide extinguishers can go up to 5861 kPa.
People Also Searches how much pressure can a fire extinguisher take
| fire extinguisher pressure level |
| high pressure fire extinguisher |
| fire extinguisher pressure testing |
| fire extinguisher pressure gauge |
| fire extinguisher pressure gauge reading |
| co2 fire extinguisher pressure |
How I Recharge & Re pressurize a old Fire Extinguisher DIY Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher