How to make a powerful fire extinguisher

In this video I will show you how to make a very powerful fire extinguisher, because even tho water will put out some fires, it will not put out all fires, s…

1. Light the candle. 2. Pour the vinegar into the bottle and add the baking soda. (You may want to use a funnel.) The mixture should fizz. 3. Hold the bottle sideways over the lighted candle, making sure no liquid escapes. What happens to the flame? What Happened:

how to make a fire extinguisher gun!!!(powerful)

all you need is a fire extinguisher(empty), a barrel, and a bicycle pump or a air compressor

Steps Pour the vinegar or lemon juice (about 1/3 of a cup or 5 tablespoons) into the plastic bottle. Fill the rest of the bottle with water but leave 1-2 inches left at the top. Pour 2 tablespoons of baking soda into a folded tissue or toilet paper. Poke or drill a small hole through the top of the bottle cap.

Also Check: What kind of metal are fire extinguishers made of

How to create your own fire extinguisher with household items?

Covering it with a fire blanket or a large, wet towel.Using a fire extinguisher. Be sure to aim the nozzle at the base of the fire.Dousing it with baking soda or salt. Do not use flour, which can actually explode if it’s heated too quickly.

What are the steps of using a fire extinguisher?

There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.

Also Check: Which gas is used in fire extinguisher cylinder

How to use fire extinguisher correctly?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

How do you fill a fire extinguisher?

Class A: Units contain water or foam and come in a silver cylinder. They are used to handle fires in ordinary combustibles like wood, rubber, plastic, and paper.Class B and C: Units contain Carbon Dioxide or dry chemicals and come in a red cylinder. …Class D: Units contain powder and come with a yellow cylinder. …

Also Check: How to make dry ice without fire extinguisher

People Also Searches how to make a powerful fire extinguisher

creating a fire extinguisher map

diy fire extinguisher

fire extinguisher ingredients

baking soda vinegar fire extinguisher

baking soda fire extinguisher

soda fire extinguisher

experiments with fire

science projects with fire