How to use a fire extinguisher. 1. Identify a clear exit/escape route. Before operating the fire extinguisher, make sure you have a clear evacuation path. If you cannot put out the … 2. Stand back. Face the fire and keep your back to the clear exit you earlier identified. You should stay between …
How to Use a Fire Extinguisher – Step by Step Guide
You are aware of what’s burning and are using the proper extinguisher. The fire is small enough to be extinguished. The most common way to properly use a fire extinguisher follows the PASS method: Pull the pin between the handles. Aim the hose or nozzle at the base of …
People Also Ask how to operate a fire extinguisher
What are the steps of using a fire extinguisher?
There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.
How to use a fire extinguisher safely and effectively?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
Do you know how to properly use a fire extinguisher?
To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.
What is the proper way to use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
People Also Searches how to operate a fire extinguisher
| how to use a fire extinguisher handout |
| types of fire extinguishers |
| kidde fire extinguisher |
| what fire extinguisher to use |
| steps for using a fire extinguisher |
| fire extinguisher procedure |
| pass instructions for fire extinguisher |
| fire extinguisher safety |