How to Perform a Fire Extinguisher Inspection in 3 Minutes. When performing a monthly fire extinguisher inspection, it is important to follow these 5 key steps. Check accessibility. Examine the physical state; Check the pressure gauge; Notice the inspection tag; Generate report and recommend action plan/s
The recommended way to test fire extinguishers with the pressure pin on top is to press in the pin. If it pops back up, your extinguisher is still pressurized. On models with a pressure gauge, if the needle is in the green, the unit is pressurized. Fire Extinguishers Commercial Home
Guide to Fire Extinguisher Inspection, Testing and Maintenance
Extinguishers need to have an internal examination conducted at anywhere from 1-6 year intervals depending on the type of extinguisher. For example, a dry chemical, stored pressure fire extinguisher must have an internal examination every 6 years, see NFPA 10 Table 7.3.3.1 for more details on other types of fire extinguishers. Recordkeeping
How To Check a Fire Extinguisher. Checking a fire extinguisher is not very difficult and only takes a few minutes. Here are the steps: Make sure the fire extinguisher is easily accessible. Make sure the container and handle are not damaged. Make sure the pressure gauge is in the green zone. Make sure the tag is attached and has an inspection record.
People Also Ask how to test a fire extinguisher
How often should you inspect fire extinguisher?
Visual Fire Extinguisher Inspections – Once per MonthLook for obvious signs of physical damage, such as corrosion, leakage, or dents.Check the pressure gauge to make sure the indicator is in the operating range.Make sure the pull-pin is not missing and the pull pin seal is intact.Verify the date of the last professional inspection.
More items…
Who can check fire extinguishers?
Yes, fire extinguisher inspection is a requirement. According to the Fire Protection for portable fire extinguishers standards of OSHA, The employer is responsible for inspection, maintenance, and testing (ITM) of all available portable fire extinguishers in the workplace (1910.157 (e) (1)).
What are the steps of using a fire extinguisher?
There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.
How to inspect your fire extinguisher?
When doing a DIY fire extinguisher inspection, check to make sure:The gauge on the top of the extinguisher is in the green. Some non-rechargeable extinguishers also have push-to-test pressure indicators.There is no damage or corrosion to the vessel.The expiration date has not passed.The pin is in the handle,The operating instructions face outward,It’s easily reachable and not stashed behind something.
People Also Searches how to test a fire extinguisher
| check fire extinguisher |
| who inspects fire extinguishers |
| who can check fire extinguishers |
| how long does a fire extinguisher last |
| how to use a fire extinguisher properly |
| fire extinguisher training quiz answers |
| fire extinguisher test questions |
| fire extinguisher hydrostatic testing |