The P.A.S.S. Method of Using a Fire Extinguisher. If you need to use a fire extinguisher, remember the P.A.S.S method for how to use it safely and effectively. Each letter represents one of the four steps to use the fire extinguisher: P = Pull the pin. Grab the extinguisher, hold it away from your body, and release the lock pin. A = Aim.
PASS Step 1: PULL the pin. Many fire extinguishers have a pin near the handle at the top like the one shown in the image below. Begin by removing that pin. In some cases, instead of a pin there’s been a lock latch you’ll have to release or a puncture level you have to press.
Fire Extinguishers Use & Inspection Toolbox Talk – Raken
2. Have been trained to use a fire extinguisher correctly. 3. Make sure the fire is still in the early stages. If the fire gets out of control quickly or you do not know what material is burning or how to properly use a fire extinguisher, you …
Anyone authorized to use fire extinguishers must receive proper training during initial employment and retrained annually. Use this Toolbox Talk for both …
People Also Ask how to use a fire extinguisher safety talk
What are the four steps for using a fire extinguisher?
What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.
Do you know how to properly use a fire extinguisher?
To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.
What is the proper way to use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
How to use a fire extinguisher safely and effectively?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
People Also Searches how to use a fire extinguisher safety talk
| using a fire extinguisher safely |
| proper use of fire extinguisher |
| types of fire extinguishers |
| fire extinguisher use and safety |
| how to use a fire extinguisher handout |
| kidde fire extinguisher |
| fire extinguisher procedure |
| fema fire extinguisher video |
Free Fire Extinguisher Training Video – OSHA – Updated for 2020 Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher