How to use extinguishers in fire

The best way to be ready for a fire emergency in your home is to study the steps below and review them regularly so you can protect your home and family. 1. Identify a clear exit/escape route. Before operating the fire extinguisher, make sure …

How to Use a Fire Extinguisher: 14 Steps (with Pictures)

The most common way to properly use a fire extinguisher follows the PASS method: Pull the pin between the handles. Aim the hose or nozzle at the base of the fire, leaving a distance of 6-10 feet between you and the fire. Squeeze the fire extinguisher’s handle.

What are the four steps for using a fire extinguisher?

What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.

Also Check: What can i do with old fire extinguishers

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

What is the proper way to use a fire extinguisher?

P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …

Also Check: Is the stuff that comes out of fire extinguishers bad

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.