How to use your fire extinguisher

How to use a fire extinguisher. 1. Identify a clear exit/escape route. Before operating the fire extinguisher, make sure you have a clear evacuation path. If you cannot put out the … 2. Stand back. Face the fire and keep your back to the clear exit you earlier identified. You should stay between …

How to Properly Use a Fire Extinguisher | SafeWise

When operating a fire extinguisher, tell residents to remember the word PASS: Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism. Aim low. Point the extinguisher at the base of the fire. Squeeze the lever slowly and evenly. Sweep the nozzle from side-to-side. Educate on the importance of fire extinguisher maintenance. …

Also Check:  How to pick out fire extinguisher

People Also Ask how to use your fire extinguisher

What are the four steps for using a fire extinguisher?

What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

Also Check:  Who can repair aircraft fire extinguishers

What is the proper way to use a fire extinguisher?

P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

Also Check:  What type of fire extinguisher is labeled b 1

People Also Searches how to use your fire extinguisher

fire extinguisher use pdf
types of fire extinguishers
fire extinguisher use pass
fire extinguisher use and safety
fire extinguisher use training
kidde fire extinguisher
classes of fire extinguishers
abc fire extinguisher use

How to Use a Fire Extinguisher Video Answer


Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher

Leave a Comment