Is fire extinguisher aim at the base

A AIM. Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. Stand approximately 8 feet away. Beside above, how do you sweep a fire extinguisher? Sweep the nozzle or hose from side to side at the base of the fire. Moving carefully toward the fire, keep the extinguisher aimed at the base of the fire and sweep back and forth until the …

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of …

When using a fire extinguisher you should aim at?

Using a fire extinguisher. Pull: Pull the pin, this will break the tamper seal. Aim: Aim low, pointing the nozzle or hose at the base of the fire. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of …

Also Check:  What year was the fire extinguisher invented

People Also Ask is fire extinguisher aim at the base

Why do you aim a fire extinguisher at the base?

Why do you aim a fire extinguisher at the base of a fire? This will allow you to discharge the extinguisher. Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel.

When using a fire extinguisher I should aim the nozzel?

"When using a fire extinguisher, I should aim the nozzel at what part of the fire?" "When using a fire extinguisher, I should sweep the nozzel from side-to-side while squeezing the handle and aiming at the base of the fire."

Also Check:  Why can carbon dioxide be used in fire extinguishers

Where should you aim a fire extinguisher?

AIM Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. NOTE: Do not touch the plastic discharge horn on CO2 extinguishers, it gets very cold and may damage skin. Besides, when using a fire extinguisher where should you specifically aim it? Pull the pin. Aim the nozzle at the base of the fire.

Does the pass method work for all fire extinguishers?

Although the PASS method works for many fire extinguishers, it’s not the right method for all. Some fire extinguishers require that you apply the fire suppressant that shoots out of the extinguisher in a top-down, rain-like manner (instead of aiming at the base and sweeping).

Also Check:  Are fire extinguishers mandatory in ontario

People Also Searches is fire extinguisher aim at the base

fire extinguisher procedure
fire extinguisher aim squeeze sweep
fire extinguisher access clearance
using the fire extinguisher
the first fire extinguisher
who made the fire extinguisher
information on fire extinguisher
history of the fire extinguisher

Various Fire extinguishers Video Answer


Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher

Leave a Comment