What are the four steps for using a fire extinguisher

How to Use a Fire Extinguisher Learn the PASS System. For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly. Sweep the nozzle from side to side at the base of the fire.

OSHA requires employees to be trained in fire extinguisher use on an annual basis, at a minimum. A simple 4 step fire extinguisher training technique to use with employees is the PASS method: P ull the pin on the extinguisher A im …

How to Use a Fire Extinguisher – A Step-by-Step Guide in …

The PASS Technique for Using a Fire Extinguisher* To put the pressurized contents of a fire extinguisher to use, follow this four-step process: PULL the pin: The handle on top of the canister should have a pin going through it to prevent accidental discharge. Remove this pin. Some fire extinguishers have a lock latch or puncture level instead of a pin.

Also Check: Is fire extinguisher powder harmful to breathe

What are the four steps for using a fire extinguisher?

What are the 4 steps for using a fire extinguisher?Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …Aim. Approach the fire standing at a safe distance. …Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …Sweep.

How to make a simple fire extinguisher?

What You Need:Empty soda bottle5 tablespoons of vinegar1/2 tablespoon of baking sodaTea light candle

How to use a fire extinguisher before you need it?

Using a Fire ExtinguisherPull the pin at the top of the extinguisher. This pin will release the lock and allow you to discharge the extinguishing agent.Aim the extinguisher at the base of the fire. …Squeeze the lever on the fire extinguisher slowly. …Sweep the nozzle from side to side to cover the area of the fire’s source until the fire is completely soused. …

Also Check: What extinguisher would you use for an oil fire

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

People Also Searches what are the four steps for using a fire extinguisher

fire extinguisher how to operate

fire extinguisher use instructions

fire extinguisher steps pass

how to use a fire extinguisher pdf

using a fire extinguisher

fire extinguisher use in order