What steps should be taken when using a fire extinguisher

Aim low toward the base of the fire. Squeeze the lever slowly. Sweep the nozzle from side to side at the base of the fire. Always test the fire extinguisher before approaching a fire to ensure it is functioning properly. Fire extinguishers should be tested annually by a reputable contractor and tagged with the date of inspection.

Assess the Fire. Next, assess the fire to decide if it can be fought with a fire extinguisher. A portable fire extinguisher should only be used on a small, contained fire. If the fire is too large or emitting toxic smoke, immediately exit the building and wait for firefighters to arrive.

Fire Extinguisher Use Steps – SelectSafety.net

Fire Extinguisher Use Steps. Step #1: Alert those around to stay away from the area and have them call the fire department, or call yourself. Do not expect the fire to remain within your ability to extinguish it. Step #2: Locate the …

Also Check:  What font to use for fire extinguisher

People Also Ask what steps should be taken when using a fire extinguisher

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

What do you do in three steps for a fire?

What to Do in Case of a FireImmediately pull the nearest fire alarm pull station as you exit the building.When evacuating the building, be sure to feel doors for heat before opening them to be sure there is no fire danger on the other side.If there is smoke in the air, stay low to the ground, especially your head, to reduce inhalation exposure. …

Also Check:  What class fire extinguisher for home

More items…

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

Which fire extinguisher should I use?

What Type of Extinguishers Are There?Water Fire Extinguishers. When tackling a fire in the home where the fuel is paper or wood, using a water extinguisher is good as it drenches the material and eliminates …Foam Fire Extinguishers. …Carbon Dioxide Fire Extinguisher. …Wet Chemical Fire Extinguisher. …Dry Water Mist Extinguishers. …Dry Powder Extinguishers. …

Also Check:  How is co2 used in fire extinguishers

People Also Searches what steps should be taken when using a fire extinguisher

fire extinguisher how to operate
using a fire extinguisher
fire extinguisher use in order

How to Use a Fire Extinguisher Video Answer


Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher

Leave a Comment