When Should You Use a Fire Extinguisher? While it may seem like the obvious answer is “in the event of a fire.” But using a fire extinguisher without taking the proper precautions can actually put you and everyone in your building at serious risk. Before using a fire extinguisher, make sure the fire is contained and is not spreading around the area. It is also …
Aim: Aim the fire extinguisher low, toward the base of the fire. If you shoot the fire extinguisher at the tops of the flames it will have no effect—you need to attack the fire at its source. Squeeze: Squeeze the lever slowly and with even pressure while the fire extinguisher discharges its contents. Sweep: Use a sweeping motion to move the nozzle from side to side …
Choosing and Using Fire Extinguishers
It is not recommended that children use fire extinguishers. Teach people how to use a fire extinguisher. When operating a fire extinguisher, tell residents to remember the word PASS: Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism. Aim low. Point the extinguisher at the base of the fire. Squeeze the lever slowly …
People Also Ask when using fire extinguisher
Which is a good technique when using a fire extinguisher?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
What is a good technique when using a fire extinguisher?
Pull the pin and hold the extinguisher with the nozzle pointing away from you, then release the locking mechanism.Aim low by pointing the extinguisher at the base of the fire.Squeeze the lever slowly and evenly.Sweep the nozzle from side to side.
When using a fire extinguisher where should you aim it?
Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal.Aim. Approach the fire standing at a safe distance.Squeeze. Squeeze the handles together to discharge the extinguishing agent inside.Sweep.
How to properly use a fire extinguisher?
P stands for pull the pin on the fire extinguisher. This will also break the tamper seal, a small device that prevents the pin from coming out accidentally.A stands for aim the nozzle or hose at the base of the fire. …S stands for squeeze the handle to release the extinguishing materials.S also stands for sweep the nozzle from side to side. …
People Also Searches when using fire extinguisher
| using fire extinguisher osha quizlet |
| using fire extinguisher pass |
| fire extinguisher location requirements |
| fire extinguisher types chart |
| fire extinguisher requirements for buildings |
| fire extinguishers required by law |
| acronym for using fire extinguisher |
| fire extinguisher code requirements |
How to Use a Fire Extinguisher Video Answer
Reference:
https://www.usfa.fema.gov/
https://en.wikipedia.org/wiki/Fire_extinguisher